12V 2.4G Bluetooth Remote Control Receiver Box Compatible with RX43 and RX23 Models

Bring Your Little Driver’s Dreams to Life with the WELLYE 2.4G Bluetooth Control Box Receiver

Imagine the delighted grin on your child’s face as they take the wheel of their favorite electric ride-on car—now picture that smile widening when you hand them a remote that truly responds without fail. Introducing the WELLYE Bluetooth Control Box Receiver, purpose-built to fit and power up your little one’s cherished ride-on car. This vital replacement part not only restores functionality but elevates every moment of play into an adventure filled with freedom, discovery, and family memories.

Why Upgrade to a 2.4GHz Bluetooth Receiver?

Standard infrared remotes can lose connection and limit range. The WELLYE receiver employs advanced 2.4GHz Bluetooth technology, delivering seamless control up to 30 feet away. No more frustration from dropped signals—just smooth acceleration, effortless turns, and reliable stops whenever you and your child need them.

Features and Benefits at a Glance

• Universal Compatibility: Works with both the RX43 and RX23 model control boxes. Easily retrofit your 12-volt ride-on car without worrying about mismatched connections.
• 7-Pin Single-Sided Socket: Designed to match the original factory wiring harness. Slide it into place and you’re ready to roll—no complicated splicing or soldering required.
• Bluetooth Reliability: Enjoy rock-solid pairing and minimal interference. You’ll love the confidence of knowing each command is delivered instantly to the ride-on car’s mainboard.
• Simple DIY Installation: Everything you need is inside. Just unplug the old control box, slide in the new receiver, and follow our step-by-step pairing guide.
• Durable Construction: Built to withstand the bounces and bumps of active play, this control box receiver holds up to the rigors of outdoor excitement—rain or shine.

Model Variants

1. RX43 12V FC CE – 7-Pin Single-Sided Socket

The RX43 variant is engineered for parents who demand consistent performance and peace of mind. Featuring a 7-pin single-sided connector, this receiver matches the wiring layout of many popular ride-on truck and car models:

• Plug-and-Play Installation: Snap the RX43 into your existing control box slot and secure with minimal effort.
• Optimized for Smooth Drives: Delivers calibrated voltage and speed control for safe, reliable acceleration.
• Childproof Casing: The sturdy housing protects delicate circuitry from dust, moisture, and curious little fingers.

2. RX23 12V FC CE – 7-Pin Single-Sided Socket

The RX23 shares the same trusted specifications as the RX43 but offers subtle differences in pin layout that suit alternate ride-on car models. Choose the RX23 if your ride-on car’s original socket matches its configuration:

• Exact Fit Guarantee: Manufactured to the same original equipment specifications.
• Consistent Power Delivery: Ensures your child experiences smooth steering and responsive throttle control.
• Hassle-Free Replacement: Swap out your old control box in minutes—no trips to the repair shop required.

Step-by-Step Pairing Guide

Getting your new Bluetooth receiver synced with your remote is as easy as 1-2-3. Let’s walk through the process:

1. Install Batteries: Open the remote’s battery compartment and insert two AAA 1.5V batteries. Watch for the positive (+) and negative (–) markings to ensure proper alignment. Close the cover and look for three quick flashes—this confirms successful battery installation.
2. Initiate Pairing Mode: Press and hold the Frequency Key (often labeled “CAR SELECT”) on the remote for about 2 seconds. You’ll see the indicator light begin to flash rapidly, signaling that the remote is ready to pair.
3. Power On the Ride-On Car: Turn the key in the ride-on car’s ignition switch or momentarily flip the power button. When the indicator on the remote goes dark, you’ve locked in the connection. If it doesn’t, simply repeat steps 2 and 3 until the light stays off.

Now your child’s ride-on car is under your command—literally in the palm of your hand!

Benefits for Parents and Kids

Every parent wants their child to explore the world safely and joyfully. With the WELLYE Bluetooth receiver installed in their ride-on car, you gain:

• Complete Remote Control: Navigate tricky paths, avoid obstacles, or gently take over control if your toddler drifts too close to the sandbox.
• Extended Playtime: Quick and easy swapping means less downtime. Keep the adventures rolling from driveway to backyard track.
• Peace of Mind: Bluetooth connectivity eliminates signal dropouts, so your child’s journey is always under the gentle guidance of proven, stable technology.
• Fuel for Imagination: The more reliable the ride-on car, the more stories they’ll weave—pirate ships on the pavement, safari expeditions in the grass, and beyond.

Technical Specifications

• Voltage Input: 12V DC
• Socket Type: 7-Pin single-sided (for RX43 and RX23)
• Bluetooth Frequency: 2.4GHz
• Control Range: Up to 30 feet
• Operating Temperature: -4°F to 122°F
• Weight: 0.6 lb (approx.)
• Batteries (Remote): 2 × AAA 1.5V (not included)

Simple Installation—Maximum Fun

Whether you’re tech-savvy or a complete DIY rookie, this receiver slides right in. Unplug the old box, insert the WELLYE unit, secure the connector, and perform a quick pairing sequence. Voilà—your child’s ride-on car is back in action, ready for high-speed chases around the living room or leisurely drives to “the moon” and back.

Don’t let a broken control box stall your child’s day of wonder. Invest in the WELLYE 2.4G Bluetooth Control Box Receiver and watch their ride-on adventures soar to new heights. Order now and turn every twist of the throttle into a moment of joy!