Toyota - Tacoma - 2024-Present - 4th Gen - Explore Series - Bed Plate

Toyota Tacoma Bed Plates for the 4th Gen 2024-Present.  Please see installation note below.*

They are available in three options:

1. Base Plate without Built-In Anchor Points - A clean slate without drilled holes.
2. Base Plate with our Drawer System Anchor Points - Designed for Tacoma Bed Drawers
3. Base Plate with our GGCS Camper Interior Anchor Points - Designed for our Goose Gear Camper System Interior

All models require drilling through the bed of the truck to bolt the plate through.  Before drilling, please be sure to check under your truck bed to confirm hole placement in the Goose Gear Bed Plate will not interfere with any wiring, hoses or fluid lines underneath the bed.  Goose Gear cannot design around the possibility that the manufacturer may have changed the locations of wiring, hoses or lines on any given vehicle.

*At this time Goose Gear cannot guarantee that drilling holes in the bed of a 4th Gen Tacoma, based on our placement of the mounting holes in the Bed Plate, will not come into contact with factory wiring or other components on a Hybrid vehicle.  Please understand it is the customer / installer responsibility to visually check under the bed before drilling holes for the plate installation.