These High Clearance A Arms are raw material. 1 1/4 tubing.120 wall dom.L and W offers a life time warranty on bending and breaking the arm.
Please select raw in the color options if you do not wan...
THIS LISTING IS FOR TURBO S MODELS ONLY.
The Upper Radius Rods in this kit have both a Left hand and Right hand heim on each end for adjustability if needed.
The Lower Radius Rods will be direct ...
Fitment:
2020-current Kawasaki KRX
Includes all spacers needed for install.
They are 6061 Aluminum, and made in the USA.
These Radius Rods hold a Lifetime Warranty.
THIS LISTING IS FOR 1K/TURBO/RS1 MODELS ONLY.
2014-2023 models
This listing is for the Direct Bolt Radius Rods.
The lowers are High clearance.
Includes all spacers needed for install.
They are 60...
This listing is for a SET
THESE DO NOT FIT THE XP MODEL.
They are made out of 6061 Aluminum.
They have a billet finish.
Made in America.
Lifetime Warranty on rods only.
Factory ends are not war...
These tie rods are for the Pro XP.
They have a lifetime warranty.
Factory ends are not warrantied, only the tie rod itself.
*PLEASE NOTE: If running 14″ wheels, the tie rod will make contact with...
Race Style A-Arms (STANDARD) (Turbo S)
This is for the MEGA Ball Joint. These will only work in conjunction with Keller Mega Ball Joints.
BUILT TO ORDER
These A Arms are 1 1/2 - 3/16 wall. THE UPPE...
This listing is for Turbo S models only.
This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install.
Made from 1.75 x .120 Wall Steel
POLARIS RZR XP TURBO/ TURBO S- SIDE VENT COVERSMade from 18ga steelComes with all necessary hardware. Drilling requiredAdd some bling to your XP Turbo while also protecting the frog skinCan be boug...
Upgrade from your factory radius plate to our Billet Aluminum Can-Am x3 pull plate!
This plate is compatible with the 72″ Can-Am X3 models (2017-2021 year models- ONLY)
Machined from 6061 T-6 Alum...
All parts are laser cut from .187” steel. (Shims are laser cut from .120” steel)
All parts are CNC bent for accurate fitment.
Come powder coated black
Lowers the seat ~2 inches.
*MUST HAVE FACTORY...
TURBO R 2 SEAT CAGEFits 2022-current Polaris TURBO R 2 SEATERCages are made from 1.75” DOM.7” chop measured at B Pillar (Driver head)
–IMPORTANT CAGE INFORMATION
ALL CAGES ORDERED THAT STATE “ON B...
Honda Talon Tie Rods (R EDITION ONLY)
THIS WILL NOT WORK FOR THE 23 MODELS.
This listing is for a SET
Tie Rods are made from 6061 Aluminum and have a billet finish
These Tie Rods use the factor...
TURBO R 4 SEAT CAGEFits 2022-current Polaris TURBO R 4 SEATER/ 2 SEATERCages are made from 1.75” DOM.7” chop measured at B Pillar (Driver head)
–IMPORTANT CAGE INFORMATION
ALL CAGES ORDERED ARE A...
Cooler Mounts:
This listing is for TURBO S ONLY
Cooler Mount (Factory Cage) Specs:
Works with All Turbo S with factory cage
Made from 3/16 HRPO
Comes with all hardware needed
Fully adjustable to...
2024- 2025 XP 1000 CAGE - 4 SEAT
Price includes Aluminum Roof.
Cage comes standard with front grab bars.
Please indicate color of cage and roof, if you chose the powder coat option.
–IMPORTANT CA...
1.5” BRAKE LINE CLAMPSMade from 6061 billet aluminumClamps work with the following L&W Arms.All Pro XP A armsAll Turbo S A armsAll long travel A armsAlso can be used on other arms where 1.5” OD...
These tie rods are for the L&W PRO XP LONG TRAVEL KIT ONLY.
We are not responsible for any fitment issues if using our long travel tie rods with other brand long travel kits other than ours.
TIE ROD FACTORY INNER REPLACEMENT
Made from 1-1/8'' 4140 chromoly steel and coated in a black oxide hard coat.
These are over 5 times stronger than the factory inner. These also come with our HEAV...
Milwaukee Packout mount plate:
2014-2023 models
Works with all Polaris RZR XP1000, Turbo, Turbo S. Also works with High lifter editions.
Made with 10ga HRPO steel.Easily installed/removed with no t...
This Kit fits the PRO XP Models ONLY.
This full suspension kit includes:
Steel High Clearance HD Trailing Arms. Please see individual listing for full warranty details - https://landwfab.com/produ...
This listing is for a SET
Comes with spindle ends.
6061 Aluminum.
Made in America
Lifetime Warranty on the Tie Rod itself.
Factory ends are not warrantied, only the tie rod itself.
Specs for HD R...
This listing is for 1K/TURBO models only.
This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install.
Made from 1.75 x .120 Wall Steel
CHECK OUT our Addit...
–IMPORTANT CAGE INFORMATION
ALL CAGES ORDERED ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 W...
These High Clearance A Arms are raw material. 1 1/4 tubing .120 wall dom.
These arms will rub with 14" wheels.
L and W offers a lifetime warranty on bending and breaking the arm.
Please select raw ...
This listing is for a SET
Work well for a racing style application.
6061 Aluminum.
Made in America
Life Warranty.
Ends are not warrantied, only the tie rod itself.
THIS LISTING IS FOR THE 2024 XP1000
2024 model
This listing is for the Direct Bolt Radius Rods.
The lowers are High clearance.
Includes all spacers needed for install.
PLEASE NOTE THAT IF YOU HAV...
This kit is for TURBO S Models ONLY.
Please see “additional info” below for what all products this full suspension kit includes
This full suspension kit includes:
Steel High Clearance HD Trailing ...
THIS LISTING IS FOR THE 2024 XP1000
2024 model
This listing is for the 2 Heim Radius Rods.
The lowers are High clearance.
Includes all spacers needed for install.
PLEASE NOTE THAT IF YOU HAVE GEN...
PRO R/ TURBO R/ PRO S- 2 Heim Radius Rods
Massive 2” direct bolt lowers, utilizing ¾” uniballs.
1.5” thick adjustable uppers with ¾” heims on both ends.
Made of 6061 T6 Billet Aluminum
Instructi...
Pro R 4 SEAT CAGE
Fits 2022-current Polaris PRO R 4 SEATERCages are made from 1.75” DOM.Comes with new bolts for C and D mounts7” chop measured at B Pillar (Driver head)
–IMPORTANT CAGE INFORMATION...
