RZR XP LONG TRAVEL KIT
FITMENT:2014-2023 RZR XP1000/XP TURBO.Give your 64” RZR XP A wider, and more stable stance.MADE OF DOMESTIC DOM (1.5X.120 WALL AND 1.25X.120 WALL)Made from HRPO .250 sheet st...
Race Style A-Arms (1.75 FORWARD w/adjustable uppers))- (Turbo S)
This is for the MEGA BALL JOINT.
BUILT TO ORDER
These A Arms are 1 1/2 – .120 wall with extra bracing on the arms.
You can reuse you...
KAWASAKI KRX 1000 STANDARD LOWER ADJUSTABLE A ARMSFITMENT:2020-2024 KAWASAKI KRX 1000 (ALL TRIMS)
FEATURES:Made from oversize 1.5” x .120 DOM tubing.High clearanceCamber is corrected with our adjus...
2024 RZR XP1000 FORWARD A ARMS1.75” FORWARD OFFSET A ARMSMADE FROM 1.25” X .120 AND 1.25” .188 DOML and W offers a life time warranty on bending and breaking the A arms.Will NOT work with 6+1 or 5+...
POLARIS PRO R HC Toe Delete TRAILING ARMSFitment: 2022- current Polaris Pro R.
Features A TOE LINK DELETE. These will do away with the toe link and replace it with a short,adjustable lockout bar ma...
This listing is for a set (driver and passenger) of 2 seater tree kickers.
2020-CURRENT POLARIS RZR PRO XP 2 SEAT (ALL MODELS) TREE KICKERSDESIGNED FOR 64" MACHINES
MADE OF DOMESTIC DOM (1.75X.120...
These trailing arms are for the L&W XP LONG TRAVEL KIT ONLY.
We are not responsible for any fitment issues if using our long travel trailing arms with other brand long travel kits other than ...
This set of A Arms has adjustable uppers.
The adjustment is in the uppers only, the lowers are direct bolt.
The A Arms are 1.75″ Forward. The adjustable pins have a 1 inch diameter.
You can reuse y...
2022-CURRENT POLARIS RZR TURBO R 4 SEAT (ALL MODELS) TREE KICKERS
2025 PRO S
IDEAL FOR LONG TRAVEL PRO XP ALSOFITS PRO XP, TURBO R, AND PRO SMADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)P...
2022-CURRENT POLARIS RZR PRO R 4 SEAT TREE KICKERS
MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)PROVIDES PROTECTION OF LOWER PLASTICS AND FRAMECOMES RAW OR ANY POLARIS OEM COLORHEAVY DUTY...
These a-arms are for the L&W XP LONG TRAVEL KIT ONLY.
This listing is for the full set of a-arms (UPPERS AND LOWERS) **does not include bushings or ball joints.
We are not responsible for any ...
These trailing arms are for the L&W PRO XP LONG TRAVEL KIT ONLY.
We are not responsible for any fitment issues if using our long travel trailing arms with other brand long travel kits other th...
THESE REAR A-ARMS FIT 18′ TO CURRENT MODEL RANGERS.
This set of Rear A-Arms have adjustable uppers.
The adjustment is in the uppers only, the lowers are direct bolt.
The Upper Adjustable A-Arms hav...
KAWASAKI KRX SIDE VENT COVERSMade from 18ga steelUses factory hardware. No drilling requiredAdd some bling to your KRX while also protecting the frog skin
PRO XP/R GRILL
FITMENT: All Pro XP models and Pro R/ Turbo R models 2020-2024
Easily snaps in and out.
Not screwed to the machine.
Must drill 4 holes to install snap tab.
Side Vent color will be th...
KAWASAKI KRX 1000 SEATBELT HARNESS BAR
** THIS DOES NOT WORK WITH 4 SEATER KRX)**A must have on the KRX to be able to run aftermarket harnesses.Works on factory cage as well as our L&W cageBolt...
Made from 3/16 STEELThe factory prop shaft crossmember is known to bend. When the crossmember bends, itchanges the prop shaft angle and can lead to premature bearing failure and vibrations.
Our cro...
FITMENT: 2022-CURRENT Pro R/Turbo R/ 2025 PRO SMade from 11ga HRPOFits most winches up to 6k poundsFactory bull bar and lower valance plastics are not usedColor options for bumper and overlays sepa...
These radius rods are for the L&W XP LONG TRAVEL KIT ONLY.
This listing is for the full set of radius rods (UPPERS AND LOWERS)
We are not responsible for any fitment issues if using our long...
This listing is for 1K/TURBO models only.
This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install.
Made from 1.75 x .120 Wall Steel
CHECK OUT our Addit...
-IMPORTANT CAGE INFORMATION
ALL CAGES ORDERED ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WE...
The A Arms are for the Polaris General, they will not fit the XP models.
1000 Models only. 16-21 models.
They do not have sway bar tabs .
They are the Front A Arms only.
As of right now, they only ...
This Reverse Light will work with: Turbo S models 2018-2020 and 1k/Turbo Models 2019-2020.
It comes with 12ft. of wire
5/10 rocker switch with fuse and relay
Instructions: RZR Rear Light Bar
These Tie Rods Fit Polaris RZR 1000 and Turbo
2014-2025 models
Specs on the Rods:
These are factory style ball and socket tie rods.
This listing is for a SET
6061 Aluminum.
Made in America
Lifeti...
Fitment: 2020–current Polaris Pro XP
Made from 6061–T6 Billet aluminum
Adds strength as well as looks
Comes with pull point
PLEASE NOTE: If powder coat option is chosen only the plate itself will b...
FITMENT: 1K/TURBO/RS1
These Steel HD Trailing Arms are built from 1″ 1/2 x 3 3/16 Rectangle Tubing.
You may choose the color of the Trailing arm itself, however the brake line logo bracket comes po...
2024 RZR XP LONG TRAVEL KIT
FITMENT:2024 RZR XP1000.Give your 64” RZR XP A wider, and more stable stance.
Bolt on installation.No drilling requiredThis kit adds 4” to each side of the 2024 XP1000...
These a-arms are for the L&W PRO XP LONG TRAVEL KIT ONLY.
This listing is for the full set of a-arms (UPPERS AND LOWERS) **does not include bushings or ball joints.
We are not responsible for ...
Specifications on Exhaust Cover:
It is made from 18 gauge steel.
No modifications are required to the machine
Works with factory and slip on exhausts
Does Not Work with Aftermarket Head Pipe
Fitmen...
POLARIS TURBO R - PRO S HC Toe Delete TRAILING ARMSFitment: 2022- current Polaris Turbo R / 2025 PRO S
Features A TOE LINK DELETE. These will do away with the toe link and replace it with a short,...
POLARIS RZR TURBO R REAR SWAY BAR LINKS (ALL MODELS)
FITMENT:2022–CURRENT RZR TURBO R ALL MODELS
Made from 6061 T6 billet aluminum
2x stronger than OEM
Adds to the look and strength of your machine...
